vacuum filtration

This forum is for (a) to help other members source materials, and (b) for topics regarding equipment repairs.
Post Reply
User avatar
lada
Posts: 1024
Joined: 29 Jun 2006, 10:00
State/Location: NSW

vacuum filtration

Post by lada »

Our chem students are doing gravimetric analysis and I need to update our vacuum filtration. We have a little pump attached to a tap which works well with individual flasks but is very water wasting.
We have a large vacuum pump used with bell jars and I was wondering if any of you have anything that can attach to this pump and filter a number of flasks. :oops: :oops:
Lada
User avatar
Ross
Posts: 23
Joined: 10 Jul 2006, 10:00
State/Location: NSW

Re: vacuum filtration

Post by Ross »

Lada,

You cannot use the vacuum pump for this purpose - the vacuum produced by the pump is to high and will suck what you are trying to filter into the flask (and maybe even the paper). Also you have to be very careful not to get water unto the pump.

I know the water pumps are water wasteful but they have about the right ammount of suction. The water tap does not really need to be turned full on, only needs some water flowing through the pump to get enough of a suction.

So, not an ideal answer but I cannot think of any better at the moment.

Cheers
Ross
Sandra Curry
Posts: 10
Joined: 06 May 2008, 09:57
State/Location: VIC

Re: vacuum filtration

Post by Sandra Curry »

We use hand operated vacuum pumps (originally bought for E coli determination). They are in the current Science Supply catalogue on page 89. They aren't cheap, but ours have lasted twenty years and are still going strong.
Sandra Curry
Posts: 10
Joined: 06 May 2008, 09:57
State/Location: VIC

Re: vacuum filtration

Post by Sandra Curry »

And they're entirely portable!
User avatar
lada
Posts: 1024
Joined: 29 Jun 2006, 10:00
State/Location: NSW

Re: vacuum filtration

Post by lada »

Thanks, that is exactly what we need.
Karma is coming your way
lada
User avatar
Krysia Lee
Posts: 228
Joined: 27 Oct 2009, 10:40
Job Title: Labbie
School: Brigidine College
Suburb: St Ives
State/Location: NSW

Re: vacuum filtration

Post by Krysia Lee »

Hi
I've a teacher who wants to do this and is asking for scintered glass crucibles. Any ideas on what they are and where I'll find them?
Cheers Krysia
User avatar
rae
Posts: 1045
Joined: 31 May 2006, 10:00
School: Oxley College
Suburb: Burradoo
State/Location: NSW

Re: vacuum filtration

Post by rae »

They are called Gooch crucibles and you can get them from science supply.
Cat No; 25 85134 and the cost about $40 each. There are cheaper models but I have the schott duran ones and they seem very good. If you have the catalogue see page 22 thet are listed under crucibles.
ellice
Posts: 193
Joined: 27 Jul 2007, 15:29
Job Title: Lab technician
School: The Illawarra Grammar School
Suburb: Figtree
State/Location: NSW

Re: vacuum filtration

Post by ellice »

Sintered glass crucibles are used with filtration flasks to filter very fine particles. The filtration flasks are connected to venturi pumps that use water as the source of suction. I think a lot of us are doing the prac at the moment . ie Sulfate in Fertiliser.
I purchased some sintered glass crucibles in '07 from Science Supply Australia at around $25. Cheapest price, as these things can get quite expensive. You have to buy the Guko rubber gasket as well. These fit into the flask, and then the crucible sits in that.
Lada, I've just run through the prac that was on here somewhere that uses agar as a coagulating agent and it gave good results. I just filtered with filter paper (No 42) and a filter funnel. No need for pumps. (I was a bit concerned as well about the water wasted) I've suggested we try this method next year. 8)
RosalieL
Posts: 627
Joined: 28 Jan 2021, 13:24
Job Title: Lab Assistant
School: MCS
State/Location: NSW

Re: vacuum filtration

Post by RosalieL »

Does anyone have a photo of this set-up?
bigmack
Posts: 958
Joined: 15 Dec 2015, 10:49
Job Title: Lab Technician
School: FCAC
State/Location: QLD

Re: vacuum filtration

Post by bigmack »

This sort of thing Rosalie.
There is a Buchner funnel here but you can swap that out for the Sintered glass crucible when doing the phosphate prac .

The key things are the side arm conical flask and the vacuum pump which works when water is flowing through it .
If your school is old , you may well have a metal version of the vacuum unit .
The ones here are labeled as one way valves .
IMG_1243.jpeg
You do not have the required permissions to view the files attached to this post.
RosalieL
Posts: 627
Joined: 28 Jan 2021, 13:24
Job Title: Lab Assistant
School: MCS
State/Location: NSW

Re: vacuum filtration

Post by RosalieL »

Yes this is it. Thanks. I can't work out what the sintered glass crucible is supposed to look like though. I'm pretty sure I saw some here the other day when I was looking for something else (this place needs a good clean out and it is happening soon!) but they didn't have any rubber around them to seal them to the side-arm flask.
bigmack
Posts: 958
Joined: 15 Dec 2015, 10:49
Job Title: Lab Technician
School: FCAC
State/Location: QLD

Re: vacuum filtration

Post by bigmack »

The sintered glass crucibles look like this
IMG_1246.jpeg
IMG_1248.jpeg

To seal the crucible to the Conical flask , you use a Gooch rubber or ring .

Google Gooch Rubber will get you hits to familiar Science Supply outlets
It looks like these .
IMG_1244.jpeg
IMG_1245.jpeg
Sometimes it is hard to follow the logic of the Lab assistant that proceeds you .
But I would have thought that they would have grouped the Sintered glass crucibles with the rubber seals ….. iff’n they had any idea what they were for .

If not , think where might they put a rubber seal …


Hopefully , it’s not in the Aquatics area :cheesy:
You do not have the required permissions to view the files attached to this post.
RosalieL
Posts: 627
Joined: 28 Jan 2021, 13:24
Job Title: Lab Assistant
School: MCS
State/Location: NSW

Re: vacuum filtration

Post by RosalieL »

My predecessor and I have VERY different brains! I think hers was better in a lot of ways. Unfortunately they moved out of labs into temporary labs in order to upgrade/rebuild (before my time) but the rebuild never happened so I was left with the "temporary arrangement" and I've been here 4 years now. I am trying to make it more suitable for "permanent" use... The current temporary labs are being re-done over the Christmas break so I am doing a complete move out as there will be only enough under-bench storage for the bunsens and "everyday" type stuff. The rest will go in my prep room and another room I've asked to take over for science storage for the stuff that only comes out for a couple of weeks at a time, or even once or twice a year. I am looking forward to a few discoveries as I have cardboard boxes full of stuff I haven't touched yet!
bigmack
Posts: 958
Joined: 15 Dec 2015, 10:49
Job Title: Lab Technician
School: FCAC
State/Location: QLD

Re: vacuum filtration

Post by bigmack »

That sounds horrible Rosalie .Four years of living out of random boxes would have done my head in.
I hope your well deserved upgrade goes ahead and it makes things more functional .

On a side note .
Wondering if anyone has tips for cleaning Sintered glass Crucibles ?
When they do the fertilizer /phosphate prac , the crucibles come back all yellow .I've tried all manner of things to clean them out . Even flipping them upside down and running water through them under vacuum to try and reverse flush the crap back out of them . It helps but they are still stained
User avatar
Anna Z
Posts: 296
Joined: 16 Feb 2021, 14:39
Job Title: Lab Manager
School: DET Secondary School
State/Location: VIC

Re: vacuum filtration

Post by Anna Z »

Have you tried some dilute HCl or NaOH...... soak and chuck them in an ultrasonic bath for a bit.
RosalieL
Posts: 627
Joined: 28 Jan 2021, 13:24
Job Title: Lab Assistant
School: MCS
State/Location: NSW

Re: vacuum filtration

Post by RosalieL »

Napisan is what I usually try first for glassware...
User avatar
Labbie
Posts: 3281
Joined: 28 Nov 2006, 10:00
Job Title: Retired
Suburb: At Home
State/Location: NSW

Re: vacuum filtration

Post by Labbie »

My go to Napisan
Regards Labbie

Lab Manager/Lab Tech, mind reading etc etc
Now retired :wub:
bigmack
Posts: 958
Joined: 15 Dec 2015, 10:49
Job Title: Lab Technician
School: FCAC
State/Location: QLD

Re: vacuum filtration

Post by bigmack »

Thanks
Never tried Napisan before .Might be worth a go

Ultrasonic cleaner sounds nice Anna. Remember my Father was a watchmaker and there wasn't much that couldn't be removed .Hmmmmm.Maybe next years budget . [-o<
User avatar
Anna Z
Posts: 296
Joined: 16 Feb 2021, 14:39
Job Title: Lab Manager
School: DET Secondary School
State/Location: VIC

Re: vacuum filtration

Post by Anna Z »

bigmack wrote: 08 Nov 2024, 11:24 Thanks
Never tried Napisan before .Might be worth a go

Ultrasonic cleaner sounds nice Anna. Remember my Father was a watchmaker and there wasn't much that couldn't be removed .Hmmmmm.Maybe next years budget . [-o<
Yes a little jewelry one is perfect, time to start watching the home shopping channel :wink2:
Post Reply