updating SDS's

MSDSs, Storage, Handling, Transport, Labeling, computer management systems, and anything else to do with safety.
Post Reply
mtg
Posts: 529
Joined: 15 Aug 2011, 10:48
Job Title: Lab Tech
School: NDSC
Suburb: west gippsland
State/Location: VIC

updating SDS's

Post by mtg »

I have to update all my SDS's when I get time. But I wonder if anyone at my school ever looks at them apart from me. And I rarely do. I guarantee if there is an issue/incident the teachers will just google it. They wont look up an SDS. RiskAssess does all the work for us. Curious what other labbies use them for. I have been here for a century and did read them all thoroughly when I had to print them off originally some 20 years ago. I have updated since then, but they rarely alter and it seems like a waste of time if they are identical.
Merilyn1
Posts: 1562
Joined: 12 Mar 2013, 08:10
Job Title: Labbie
School: Wollondilly Anglican College
Suburb: Tahmoor
State/Location: NSW

Re: updating SDS's

Post by Merilyn1 »

Check your legislation but I think it is very similar to NSW. Staff that handle, use or store any hazardous chemicals must have access to a SDS. You have to consider that there may be staff without convenient access to a computer e.g. your maintenance team. Also consider if there is a power or internet outage.
SDSs are only valid for five years from the date of issue. It may seem that they don't change but some actually do change, replacing them every five years ensures that these changes are captured. Please be aware, this doesn't mean they all get updated every five years at the same time. You need to be checking them more frequently as their validity will expire at different times. In reality, most people check them every year.

I have a system here were each faculty receives a hard copy of their chemical register (list of chemicals and copies of SDSs) relevant to their area. I also have a folder on our cloud storage (Google Drive for us) with electronic copies of all SDSs for the whole college grouped together in faculties.
Yep, reality is most teachers will only look at Riskassess but the legislation says they must have access to the SDS and, really, they should read them.
The example I use is that the SDS has instructions for dealing with a spill. You should be familiar with those instructions before you handle the chemical. No point running around looking for the SDS when you have a chemical running across the floor.

Once you have a system in place, it is not too tricky to keep on top of it, especially if you are only looking after Science. I coordinate our whole Chem Register as part of my WHS role.
User avatar
Anna Z
Posts: 282
Joined: 16 Feb 2021, 14:39
Job Title: Lab Manager
School: DET Secondary School
State/Location: VIC

Re: updating SDS's

Post by Anna Z »

I am in a similar situation as Merilyn1, have a system and my spreadsheet actually flags when one is coming due (the 5 year mark)...I go in every 2-3 weeks and check, update and reprint if needed. I also review all our Chemical Risk Assesments (we do a RA on every chemical before it gets ordered / or reordered) yearly for DG chemicals and then on a less frequent basis for hazardous chemicals. Once your system is set up it sort of ticks along in the background.
User avatar
Labbie
Posts: 3273
Joined: 28 Nov 2006, 10:00
Job Title: Retired
Suburb: At Home
State/Location: NSW

Re: updating SDS's

Post by Labbie »

I never used them or every saw a teacher use them. But a NSW requirment so had to be done.
Regards Labbie

Lab Manager/Lab Tech, mind reading etc etc
Now retired :wub:
bigmack
Posts: 925
Joined: 15 Dec 2015, 10:49
Job Title: Lab Technician
School: FCAC
State/Location: QLD

Re: updating SDS's

Post by bigmack »

Going through ours ATM
There are Hydrogen Peroxide ones for 3% ,6%,9% and 35% . (LOL all from Chemwatch of course )

I see they are stored in the fridge . Now it seems that the lower strength ones are in Risk assess labeled bottles and presumably made from diluting down the 35% solution .
I was under the impression that only the purchased bottle , in this case the 35% H2O2 had to have an SDS , not the ones diluted in the Lab .
Have I got this right ?
User avatar
Labbie
Posts: 3273
Joined: 28 Nov 2006, 10:00
Job Title: Retired
Suburb: At Home
State/Location: NSW

Re: updating SDS's

Post by Labbie »

Correct, for NSW but I'm not too sure regarding QLD sorry Bigmack
Regards Labbie

Lab Manager/Lab Tech, mind reading etc etc
Now retired :wub:
User avatar
Anna Z
Posts: 282
Joined: 16 Feb 2021, 14:39
Job Title: Lab Manager
School: DET Secondary School
State/Location: VIC

Re: updating SDS's

Post by Anna Z »

bigmack wrote: 16 May 2024, 15:29 Going through ours ATM
There are Hydrogen Peroxide ones for 3% ,6%,9% and 35% . (LOL all from Chemwatch of course )

I see they are stored in the fridge . Now it seems that the lower strength ones are in Risk assess labeled bottles and presumably made from diluting down the 35% solution .
I was under the impression that only the purchased bottle , in this case the 35% H2O2 had to have an SDS , not the ones diluted in the Lab .
Have I got this right ?
Depends on your auditor on the day!!. Generally only the highest is needed, but some who don't have a science background go all crazy and ask for all SDS's. We just keep the highest.
bigmack
Posts: 925
Joined: 15 Dec 2015, 10:49
Job Title: Lab Technician
School: FCAC
State/Location: QLD

Re: updating SDS's

Post by bigmack »

Thanks Labbie and Anna.
I think I'll do that then .
Otherwise I guess I'd be printing SDS's for every Molarity of every chemical we had in the store :-(
Merilyn1
Posts: 1562
Joined: 12 Mar 2013, 08:10
Job Title: Labbie
School: Wollondilly Anglican College
Suburb: Tahmoor
State/Location: NSW

Re: updating SDS's

Post by Merilyn1 »

Keep the SDSs for the ones you have purchased.
Post Reply