Plastic bottles/jerry cans for solutions
-
- Posts: 2
- Joined: 24 Mar 2016, 10:11
- State/Location: NSW
Plastic bottles/jerry cans for solutions
Hi, I'm looking for a cheap supplier of plastic bottles and plastic jerry cans (with handles) for stock solutions, thanks!
-
- Posts: 1491
- Joined: 12 Mar 2013, 08:10
- Job Title: Labbie
- School: Wollondilly Anglican College
- Suburb: Tahmoor
- State/Location: NSW
Re: Plastic bottles/jerry cans for solutions
What size were you after? I've had trouble with the taps leaking on the larger containers, so I avoid using them where possible. Last year in my old job we hosted the titration competition and needed 20L of solution so I bought a 20L container from Serrata, put some plumbers tape around the thread before fitting the tap. It was in that container for a few days and I had no problems. I can't remember what it cost, but they do have a good range of different sized containers. I'd imagine all the other suppliers do too, but at the time the HT insisted I buy them from Serrata.
-
- Posts: 2
- Joined: 24 Mar 2016, 10:11
- State/Location: NSW
Re: Plastic bottles/jerry cans for solutions
Does anyone else use People in Plastic? They say they supply Wollonong Uni. I'm after 1L and 2.5L plastic bottles with inbuilt handles. They have some D.G. Class ones about a quarter of Serrata's prices...
- littltesttube
- Posts: 90
- Joined: 25 May 2012, 16:04
- State/Location: NSW
Re: Plastic bottles/jerry cans for solutions
Hi Sharon
I bought mine from Westlab a couple of years ago, but not sure how much I paid. Do not think it was much. This is 1 Litre.
I bought mine from Westlab a couple of years ago, but not sure how much I paid. Do not think it was much. This is 1 Litre.
You do not have the required permissions to view the files attached to this post.
-
- Posts: 116
- Joined: 30 May 2015, 17:47
- Job Title: Purveyor of stuff
- School: Broughton Anglican College
- Suburb: Menangle
- State/Location: NSW
Re: Plastic bottles/jerry cans for solutions
I just got some from serrata 1L for $4.30 ... They were cheapest - having said that just googled and found
https://www.aussiesoapsupplies.com.au/jerry-can-1l.html $3 each
and oh my stars ... just found this mob - not sure how DET schools will go ordering but heaps cheaper
https://peopleinplastic.com.au/contact/
$1.26 for a 1l jerry can with a red lid!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Placing an order tomorrow ... doesnt look like they have minimum orders - delivery is $30 or you can send your own courier to pick up ...
https://www.aussiesoapsupplies.com.au/jerry-can-1l.html $3 each
and oh my stars ... just found this mob - not sure how DET schools will go ordering but heaps cheaper
https://peopleinplastic.com.au/contact/
$1.26 for a 1l jerry can with a red lid!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Placing an order tomorrow ... doesnt look like they have minimum orders - delivery is $30 or you can send your own courier to pick up ...
With thanks Kate
-
- Posts: 497
- Joined: 28 Jan 2021, 13:24
- Job Title: Lab Assistant
- School: MCS
- State/Location: NSW
Re: Plastic bottles/jerry cans for solutions
Has anyone on here used the people in plastic jerry cans? Are they any good? I'm looking at the 1L ones.
Re: Plastic bottles/jerry cans for solutions
Do you have anything like this now 1 or 2 litre I've just done a search and couldn't find anything, if so could we have a link.littltesttube wrote: ↑04 May 2017, 12:50 Hi Sharon
I bought mine from Westlab a couple of years ago, but not sure how much I paid. Do not think it was much. This is 1 Litre.
thanks
You do not have the required permissions to view the files attached to this post.
- Loopy
- Posts: 592
- Joined: 08 Jun 2006, 10:00
- School: Mater Dei Catholic College
- Suburb: Wagga Wagga
- State/Location: NSW
Re: Plastic bottles/jerry cans for solutions
Hi Macca,
MTA have them. 1l and 2.5L .
MTA have them. 1l and 2.5L .
Lou P.
Learner Lab Technician
Wagga Wagga
NSW
Learner Lab Technician
Wagga Wagga
NSW
-
- Posts: 825
- Joined: 15 Dec 2015, 10:49
- Job Title: Lab Technician
- School: FCAC
- State/Location: QLD
Re: Plastic bottles/jerry cans for solutions
I just bought some from Haines . $4.95 for the 1 litre ones .I prefer Haines ones as they have a wider Lid than the ones pictured above which makes labelling the Lids a bit easier .
MTA ones have no lids , you have to buy them extra .
MTA ones have no lids , you have to buy them extra .
-
- Posts: 825
- Joined: 15 Dec 2015, 10:49
- Job Title: Lab Technician
- School: FCAC
- State/Location: QLD
Re: Plastic bottles/jerry cans for solutions
I just bought some from Haines . $4.95 for the 1 litre ones .I prefer Haines ones as they have a wider Lid than the ones pictured above which makes labelling the Lids a bit easier .
MTA ones have no lids , you have to buy them extra .
I noticed that a lot of our Jerry Cans are deteriorating . Particularly the lids are crumbling . We also had a lot of 2 litre ones that barely had more than 250mls in them , so I have decided to replace them all and redo the Labels .
I wish Risk assess had a Label that would fit on a Jerry Can , but they don't have one that appeases me , so I have made my own templates and labels in Word . The first few took ages but now its quick and easy . I paint the labels with Exterior PVA glue .This makes them semi water proof .
MTA ones have no lids , you have to buy them extra .
I noticed that a lot of our Jerry Cans are deteriorating . Particularly the lids are crumbling . We also had a lot of 2 litre ones that barely had more than 250mls in them , so I have decided to replace them all and redo the Labels .
I wish Risk assess had a Label that would fit on a Jerry Can , but they don't have one that appeases me , so I have made my own templates and labels in Word . The first few took ages but now its quick and easy . I paint the labels with Exterior PVA glue .This makes them semi water proof .
You do not have the required permissions to view the files attached to this post.
-
- Posts: 497
- Joined: 28 Jan 2021, 13:24
- Job Title: Lab Assistant
- School: MCS
- State/Location: NSW
Re: Plastic bottles/jerry cans for solutions
That's a great idea to paint over them with glue! My plan is to use the dropper bottle label on the front and the large label on the side when I redo mine. I don't have the time or patience to make my own!
- Anna Z
- Posts: 252
- Joined: 16 Feb 2021, 14:39
- Job Title: Lab Manager
- School: DET Secondary School
- State/Location: VIC
Re: Plastic bottles/jerry cans for solutions
@bigmack
They look excellent, with 2M being DG class 8, do you keep it stored with all the other concs ?. We have ours separated in a DG cabinet.
They look excellent, with 2M being DG class 8, do you keep it stored with all the other concs ?. We have ours separated in a DG cabinet.
Last edited by Anna Z on 31 Jul 2022, 19:08, edited 3 times in total.
-
- Posts: 825
- Joined: 15 Dec 2015, 10:49
- Job Title: Lab Technician
- School: FCAC
- State/Location: QLD
Re: Plastic bottles/jerry cans for solutions
Surffice to say that it is normally stored in the chem store rather than just on the shelf . But the Chem store needs a good sort out . Once I have git rid of all the weird molarity 2litre Gerry cans , I’ll address the DG issue
- Anna Z
- Posts: 252
- Joined: 16 Feb 2021, 14:39
- Job Title: Lab Manager
- School: DET Secondary School
- State/Location: VIC
Re: Plastic bottles/jerry cans for solutions
it's never ending isn't it
Re: Plastic bottles/jerry cans for solutions
Ordered the 1ltr from Haines today thank you Bigmack
-
- Posts: 825
- Joined: 15 Dec 2015, 10:49
- Job Title: Lab Technician
- School: FCAC
- State/Location: QLD
Re: Plastic bottles/jerry cans for solutions
Found some more disintegrating Jerry Cans .
These ones looked OK until I gave them a squeeze .They crumbled instead of squishing.
Doubt it was 0.001HCl that did this , perhaps it had something else in it before it was repurposed . Be wary folk , seems these things may have a time limit .
BTW , these ones are probably circa 1985-1990
These ones looked OK until I gave them a squeeze .They crumbled instead of squishing.
Doubt it was 0.001HCl that did this , perhaps it had something else in it before it was repurposed . Be wary folk , seems these things may have a time limit .
BTW , these ones are probably circa 1985-1990
You do not have the required permissions to view the files attached to this post.
- Anna Z
- Posts: 252
- Joined: 16 Feb 2021, 14:39
- Job Title: Lab Manager
- School: DET Secondary School
- State/Location: VIC
Re: Plastic bottles/jerry cans for solutions
My Goodness.... I only just threw out about 10 old bottles last week...gave them a squeeze, did not split or break but felt a little to firm... in the bin.
-
- Posts: 497
- Joined: 28 Jan 2021, 13:24
- Job Title: Lab Assistant
- School: MCS
- State/Location: NSW
Re: Plastic bottles/jerry cans for solutions
Looking for opinions - Would you be happy with a sideways sticker/label on your chemicals? I have bought some new jerry can style bottles for stock solutions and want to use sticky labels on them using RiskAssess. The large ones are slightly too big to fit the way they are printed, but fit perfectly if they were stuck on sideways. The label on the front of the bottle would be the correct way (smaller, like a dropper bottle label). Would this bother you do you think?
I don't have the time or patience to make my own like bigmack did!
I don't have the time or patience to make my own like bigmack did!
-
- Posts: 1491
- Joined: 12 Mar 2013, 08:10
- Job Title: Labbie
- School: Wollondilly Anglican College
- Suburb: Tahmoor
- State/Location: NSW
Re: Plastic bottles/jerry cans for solutions
Rosalie - it is your chem store and if it doesn't bother you, go ahead and do it!
The other option is to take a screen shot and paste it into the Avery label template and you might be able to adjust it to fit.
But, I'd be taking the lazy option too, especially if I have other things that need to be done.
The other option is to take a screen shot and paste it into the Avery label template and you might be able to adjust it to fit.
But, I'd be taking the lazy option too, especially if I have other things that need to be done.
-
- Posts: 497
- Joined: 28 Jan 2021, 13:24
- Job Title: Lab Assistant
- School: MCS
- State/Location: NSW
Re: Plastic bottles/jerry cans for solutions
Yeah, I know, but I'm also trying to think ahead for when I one day pass the prep room on to someone else and is it likely to drive them nuts?? hahah
I like the idea of having the big ones on the side with all the extra info but the small ones on the front for easy reading!
I like the idea of having the big ones on the side with all the extra info but the small ones on the front for easy reading!