Phenolphthalein Agar

and any other non-chem subjects.
User avatar
Labbie
Posts: 2865
Joined: 28 Nov 2006, 10:00
Job Title: Retired
Suburb: At Home
State/Location: NSW

Re: Phenolphthalein Agar

Post by Labbie » 12 Mar 2019, 09:42

I always found Agar 1000 was just awful, it just never never set. I like agar 750 but find it so hard to purchase. There never use to be different agar's around, so perhaps there is another one?
Regards Labbie

Lab Manager/Lab Tech, mind reading etc etc
Now retired :wub:

User avatar
nickykinz
Posts: 270
Joined: 02 Feb 2009, 12:53
Job Title: Lab Assistant
School: St Augustine's College
Suburb: Augustine Heights
State/Location: QLD

Re: Phenolphthalein Agar

Post by nickykinz » 12 Mar 2019, 12:31

I usually use 25g per L but just because it gives a firmer agar, not because it didn't set. I do also use powdered phenolphthalein as it seems to give a better colour. I do 1g per litre. It sounds like you did everything else right though. I make sure it boils but not for a particular amount of time and I add the NaOH as a solution once it has cooled to 60. I don't see why putting it in the fridge would stop it from setting. It should have just speeded it up. I wouldn't have been surprised if you got some cracking or something from cooling it quickly but not stopping it set at all.
I would suggest increasing the amount of agar in case it is old, maybe boiling it for an extra 30 seconds, using powdered phenolphthalein and crossing your fingers.
If you have time though you could boil it up again and see if it sets. You should be able to do that quite quickly and may save you redoing the whole lot. I've reused ones when they haven't set properly, but I think they were from not being brought to boil properly in the first place.
Nicky
;)
St Augustine's College
Augustine Heights, QLD 4300

emma.hunt
Posts: 5
Joined: 09 Feb 2018, 18:45
State/Location: NSW

Re: Phenolphthalein Agar

Post by emma.hunt » 25 Jun 2019, 10:16

Heya.
If using the dropper trays (or any trays), does the agar come out easily enough or does it stick to the edges?

Thanks

Merilyn1
Posts: 880
Joined: 12 Mar 2013, 08:10
Job Title: Labbie
School: Wollondilly Anglican College
Suburb: Tahmoor
State/Location: NSW

Re: Phenolphthalein Agar

Post by Merilyn1 » 25 Jun 2019, 10:30

Comes out fine. It's been ages since I made it, but I don't ever remember a problem. Might have to run a blade around the edge but can't remember doing that.

KylaW
Posts: 9
Joined: 29 Aug 2017, 10:27
Suburb: Penrith
State/Location: NSW

Re: Phenolphthalein Agar

Post by KylaW » 26 Jun 2019, 10:20

Hi Lyn, my phenolpthalein agar didn't work this year either. Two failed batches. The third time I boiled it for a few minutes (I've always just added boiling water), and used bromothymol blue instead. It set great, plus the agar turns from blue to yellow (rather than clear) which makes the diffusion easier for the students to see. The teacher asked to stick to this recipe in future years.
Still not sure what went wrong, perhaps the age of my agar meant it needed the extra boiling?

Post Reply